Imada MH-275 Horizontal Test Stand with Auto Cycle and Force Control, 275 lbs Capacity

Imada MH-275 Motorized Horizontal Test Stand

Capacity: 275 lbs / 125 Kg / 1225 N

The Imada MX-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.

Connect the Imada MX-275 test stand with a Z2 or ZP Series force gauge and enable force controlled testing.

High/Low Set Point Force Control

Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.

One Way Force Control

Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stands carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.

Speed control, quick switch and emergency stop are standard features. Optional timer and digital distance meter available.

*FORCE GAUGE NOT INCLUDED

Designed to work with the Z2 & ZP force gauges.

Features

• One stand for both compression (push) and tension (pull) tests
• Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control
• Clearance 16"
• Force Controlled operation with ZP & Z2 Series force gauges
• Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range
• Wide speed range: 0.4 9.4 in/min (optional speed ranges available)
• Optional timer and digital distance meter

Specifications

Dimensions

Related Products

ZP
Digital Force Gauge with USB Output

• Overload protection 200 % full scale

Click image for more info

Z2
Digital Force Gauge

• Output signals (RS 232 C, analog and Mitutoyo Digimatic)

Click image for more info

SW-1
Data Acquisition Software for Force Gauges & Torque Gauges

• Full SPC and graphing capabilities
• Automates your data collection
• Provides a running log of all measurements along with a chart of the data as well as statistical information

Click image for more info

LP-99
Lexan Safety Shield

• Helps protect personnel from injury by containing debris during testing

Click image for more info