- Mark-10 MF100 USB Sensor Interface
- 5 inch (1.5 m) Tethered USB Cable
- Strain Relief for Sensor Cable
- MESURu00aeFlex Software
- Certificate of Calibration
Mark-10 MF100 USB Sensor Interface with MESUR Flex
$825.00
Loading...
Loading product info...
Product Description
The Mark-10 MF100 USB Sensor Interface connects strain gagebased load cells, force sensors, and torque sensors to a PC or USB hub using the MESURFlex configuration software. MESURFlex supports a wide range of applications in weighing, force, and torque measurement. It accommodates force sensors from 0.12 to 750,000 lbF (0.5 N to 4,000 kN) and torque sensors from 10 ozFin to 40,000 lbFft (7 Ncm to 57,000 Nm).
A built-in screw terminal block allows quick, solder-free connection of sensor wires to the interface. Through MESURFlex, select the sensor's capacity, add a unique identifier, and calibrate the sensor through a step-by-step wizard. The software contains basic settings for changing measurement units, viewing peak, real-time, and time-averaged data. Or, control the sensor and acquire data via an extensive library of serial commands, ideal for integration into a data collection system.
Use the intuitive MESURFlex wizard to set sensor capacity, assign unique identifiers, and complete step-by-step calibrations. The software provides instant access to peak, real-time, and time-averaged data with customizable measurement units. For advanced users, an extensive library of serial commands allows for seamless integration into your existing data collection systems.
Simplified Interface to a PC
Kit Contents
Features
- Connect strain gage-based load cells, force sensors, and torque sensors to a PC
- Screw terminal block allows for easy connection of sensor wires
- Configure sensor capacity, resolution, and identifier via MESURFlex
- Calibrate the sensor on a PC with an intuitive step-by-step interface in MESURFlex
Specifications
| Sensor Requirements: | Mark-10 MF100 USB Sensor Interface |
| Type: | Full bridge |
| Resistance: | 300 - 1000 ohms |
| Sensitivity: | 13mV/V full scale |
| Force range: | 0.12 lbF - 500 T [0.5 N - 5,000 kN] |
| Torque range: | 10 ozFin - 40,000 lbFft [7 Ncm - 57,000 Nm] |
| Load accuracy: | 0.1% of full scale + sensor |
| Load sampling rate: | 7,000 Hz |
| Data output rate: | Up to 500 Hz, user-configurable |
| Environmental requirements: | 40 - 100F, max. 96% humidity, non-condensing |
| Conformance: | CE, UKCA |
Related Product
Mark-10 PTA Plug and TestTM Adapter
The Mark-10 PTA Plug and TestTM Adapter is used to connect common strain Gage-based load cells, force sensors, and torque sensors to our Models 5i and 3i indicators with this user-configurable adapter and software.Sensor capacity and resolutions may be programmed via an included software utility, which includes a library of common force capacities from 0.12 to 750,000 lbF (0.5 N to 4,000 kN), and torque capacities from 10 ozFin to 40,000 lbFft (7 Ncm to 57,000 Nm). An identification number may be programmed, which is displayed upon indicator power-up or the indicator's Information screen.
Mark-10 Series R01 S-Beam Tension & Compression Force Sensor
The Series R01 S-Beam Force Sensor is a rugged S-Beam force measurement sensor for tensile and compressive forces up to 10,000 lb. Durable S-Beam architecture allows for many applications and setups. Solid steel construction ensures many years of use in factory or laboratory environments.
Mark-10 Series R02 Compression Force Sensor
The Mark-10 Series R02 Compression Force Sensor is a button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the R02 is ideal for heavy duty applications with space constraints.
Mark-10 Series R03 Tension and Compression Force Sensor
The Mark-10 Series R03 Tension and Compression Force Sensor is a force measurement sensor for tensile and compressive loads in a wide variety of applications, available in capacities from 0.25 lb to 100 lb. Thread on two sides can accept a variety of hooks and implements, making this sensor particularly well suited for inline tests.
Downloads
