Force and Torque Measurement Instruments

The Mark-10 WTT-1000 system is designed for testing large diameter wires for UL and MIL Spec Testing. Available with a set of heavy-duty self-tightening wedge grips or a combination of wedge grip and vise grip to securely hold your samples. A hook is also included which can be used to grip ring terminals. Measurement accuracy is 0.1% of full scale, and resolution is 0.5 lbs / 0.2 Kg / 2 N. A large, backlit LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. On-board data memory for up to 1,000 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.

Please click on the links below for additional information on the models available for this product:

The Series 7I professional digital force / torque indicator is designed to work with a wide range of our remote force and torque sensors. With exclusive Plug & Test technology, all calibration and configuration data is saved within the sensor's smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other indicators. The Mark-10 Series 7I features an industry-leading sampling rate of 14,000 Hz, producing reliable results for extremely quick-action tests. In addition to the 5i indicator's functions, the Series 7i features high speed continuous data capture and storage, with memory for up to 5,000 readings, at an acquisition rate of up to 14,000 Hz. The Series 7I also features programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. Coefficient of friction unit of measurement and a user-defined unit of measurement add flexibility for specialized applications. For productivity enhancement, the indicator also features automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st / 2nd peak detection. The Series 7I interfaces with our motorized test stands to permit functions such as break testing, dynamic load holding, PC control capability, and more. The included MESURTM Lite data acquisition software tabulates continuous or single point data. Data saved in the indicator's memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.

Please click on the links below for additional information on the models available for this product:

The Imada DSV Vector Force Gauge is a simple-to-use basic gauge featuring user-friendly menu operation. The built-in tilt sensor with audible alert warns users of deviations from the reference angle. Selections including unit and measuring mode can be locked to prevent accidental changes.

Please click on the links below for additional information on the models available for this product:

The Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches is a fast response torque tester that is perfectly suited for on-the-spot calibration of air tools and impact drivers, but will calibrate any type of manual wrenches as well. This torque tester gives a digital readout of peak value in either direction and also indicate the number of blows for a selected time period. The Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches has an accuracy of 0.5%, 1 LSD, Peak, Real Time and Peak Down modes, and provides peak data for SPC (statistical process control) via the RS232 port

Please click on the links below for additional information on the models available for this product:

The Imada HTGS Digital Torque Gauge is a precision instrument that features a remote torque sensor with a Jacobs chuck. The chuck is designed to grip a test sample, a screwdriver bit or a wide range of other fixtures. The Imada HTGS measures torque in both clockwise and counter-clockwise directions. The display shows measurements in lbf-in, ozf-in, kgf-cm, or N-cm. The Imada HTGS torque tester features easy to use menus to make programming simple. Select units, reverse the display, set high/low setpoints, and set all other functions using plain language menus.

Please click on the links below for additional information on the models available for this product:

The Mark-10 G1011 Rubber Tip is designed to simulate a finger for testing push buttons, membrane switches, etc. Use this grip with a force gauge and test stand to create a complete compression testing system.

Please click on the links below for additional information on the models available for this product:

The Mark-10 G1010 Jacobs Chuck Pin Vise is suitable for holding round samples such as wire or tubing up to 0.375" diameter. The Mark-10 G1010 can mount to any force gauge or test stand

Please click on the links below for additional information on the models available for this product:

The KC Heavy-Duty Wedge Grip is ideal for tensile measurements of high capacity materials. Attachment/detachment of a test piece can be done by one-touch operation. The wedge grip is self-tightened by applying tensile force (spring-loaded wedge grip).

Please click on the links below for additional information on the models available for this product:

The Mark-10 Series-E Ergonomics Force Gauge is a precision instrument that makes job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. Series E presents the ergonomist and other professionals with a simple and economical testing solution. 100 lbF, 200 lbF and 500 lbF (500, 2,500, and 5,000 N) capacity force gauges are available, along with a wide range of attachments for various applications. Select a pre-configured kit, including a gauge, accessories, and carrying case, or select each item individually to suit your needs. Attachments click and lock into place via innovative Click-Lock technology, a rugged anti-rotation locking mechanism. The attachments may be clicked into 90 degrees or 180 degrees orientations. No fastening is required, as with conventional force gauges, thereby reducing the risk of damage to the instrument.

Please click on the links below for additional information on the models available for this product:

The Mountz Gedore DS Dial Torque Wrench is typically used as a quality control instrument to verify or monitor torque. However, some customers find them a resourceful production tool. In all cases, our dial wrenches are found to offer unmatched performance for several reasons. First, they are simple and easy to calibrate. Second, they incorporate an overload protection device to prevent over-torque and damage to parts or to the wrench. Third, our dial wrenches are non-length dependent, which means an operator can hold the wrench anywhere along the handle and the exact torque will be achieved. Lastly, the wrench offers a built-in ratchet mechanism.

Please click on the links below for additional information on the models available for this product: