Digital Torque Gauges Models

Torque testers are used as quality control devices to test or calibrate torque controlled tools. This includes electronic torque wrenches, click torque wrenches, dial torque wrenches, electric screwdrivers, air screwdrivers, pulse tools, cordless screwdrivers, nut-runners, and torque screwdrivers.

We offer Digital Torque Testers with Remote Sensor, Torque and Angle Analyzer,Dial Torque Analyzer, Bottle Cap Torque Analyzer, and much more.

For a complete list of features and accessories, please check all Digital Torque Testers models below. If you are having difficulties finding the product you need, feel free to contact us and a product specialist will be happy to assist you finding a quality Torque Tester that fits at a great price!

AWS AWS-1000 Series Mechanical Torque Wrench Loader
AWS AWS-1000 Series Mechanical Torque Wrench Loader

AWS AWS-1000 Series Mechanical Torque Wrench Loader
3 Ranges up to 1000 lb-ft / 1350 Nm
Optional Motor Kit
The AWS AWS-1000 series mechanical torque wrench loaders are designed for use with ourIT Transducers,MTMandTT-QCMtorque testers. These precision torque loaders allow operators to precisely test and calibrate torque wrenches up to 1000 lb-ft / 1350 Nm with measuring accuracy up to 0.25% of indicated readings, satisfying metrology lab requirements while providing the durability required for production environments.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS AWS-1025 Mechanical Torque Wrench Loader, 250 lb-ft Capacity
3,695.00
AWS AWS-1075 Mechanical Torque Wrench Loader, 750 lb-ft Capacity
3,895.00
AWS AWS-11000 Mechanical Torque Wrench Loader, 1000 lb-ft Capacity
4,695.00

AWS ILTT Inline Digital Torque Tester
AWS ILTT Inline Digital Torque Tester

AWS ILTT Inline Digital Torque Tester
Inline digital torque tester for quick tool verification
Ranges up to 5000 lb-ft
Eight selectable engineering units: Oz.in., Lb.in., Lb.ft., Nm, cNm, KgfCm, gfCm, Kgfm
The versatile AWS ILTT Inline Digital Torque Tester is used to convert any non-impacting torque tool into a complete torque measuring & analyzing system, simply connect the tester to the square drive, attach a socket and measure clockwise or counter-clockwise torque. Suitable for use with any hand tool or non-impacting power tool including torque wrenches, breaker bars, nut-runners and more. Internal NiMH rechargeable batteries provide 8-10 hours continuous use. The AWS ILTT takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking and Auto Clear.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS ILTT-10000F / ICF-10000 Inline Torque Tester, 1000 - 10000 Lb-ft, 2 1/2" Sq. Dr.
2,995.00
AWS ILTT-1000F / ICF-1000 Inline Torque Tester, 100 - 1000 Lb-ft, 1" Sq. Dr.
1,995.00
AWS ILTT-100F / ICF-100 Inline Torque Tester, 10 - 100 Lb-ft, 1/2" Sq. Dr.
1,750.00
AWS ILTT-100i / ICI-100 Inline Torque Tester, 10 - 100 Lb-in, 1/4" Sq. Dr.
1,550.00
AWS ILTT-150F / ICF-150 Inline Torque Tester, 15 - 150 Lb-ft, 1/2" Sq. Dr.
1,750.00
AWS ILTT-2000F / ICF-2000 Inline Torque Tester, 200 - 2000 Lb-ft, 1 1/2" Sq. Dr.
2,350.00
AWS ILTT-250F / ICF-250 Inline Torque Tester, 25 - 250 Lb-ft, 1/2" Sq. Dr.
1,750.00
AWS ILTT-250i / ICI-250 Inline Torque Tester, 25 - 250 Lb-in, 3/8" Sq. Dr.
1,550.00
AWS ILTT-3000F / ICF-3000 Inline Torque Tester, 300 - 3000 Lb-ft, 1 1/2" Sq. Dr.
2,350.00
AWS ILTT-5000F / ICF-5000 Inline Torque Tester, 500 - 5000 Lb-ft, 1 1/2" Sq. Dr.
2,350.00
AWS ILTT-500i / ICI-500 Inline Torque Tester, 50 - 500 LB-in, 3/8" Sq. Dr.
1,550.00
AWS ILTT-6000F / ICF-6000 Inline Torque Tester, 600 - 6000 Lb-ft, 1 1/2" Sq. Dr.
2,450.00
AWS ILTT-600F / ICF-600 Inline Torque Tester, 60 - 600 Lb-ft, 3/4" Sq. Dr.
1,895.00
AWS ILTT-750F / ICF-750 Inline Torque Tester, 75 - 750 Lb-ft, 3/4" Sq. Dr.
1,895.00

AWS MTM Multi-Channel Digital Torque Tester
AWS MTM Multi-Channel Digital Torque Tester

AWS MTM Multi-Channel Digital Torque Tester for Power Drivers & Wrenches
18 Ranges up to 5000 Lb-ft
Eight selectable engineering units: oz-in, lb-in, lb-ft, N-m, cN-m, Kgf-cm, gf-cm, Kgf-m
Programmable high/low setpoints
The AWS MTM Multi-Channel Digital Torque Tester is designed to provide an economical way to measure and calibrate multiple torque tools. The AWS MTMDP models include an integrated display for a fully integrated tester. Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the MTM series, up to 4 transducers can integrated in one compact housing. The small footprint also allows for a clean, well-organized work space. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed. Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS MTMDP-2L Multi-Range Torque Tester with any 2 Transducers up to 750ft-lbs
3,095.00
AWS MTMDP-2S Multi-Range Torque Tester with any 2 Transducers up to 1000 lbf-in
2,695.00
AWS MTMDP-3L Multi-Range Torque Tester with any 3 Transducers up to 750ft-lbs
3,695.00
AWS MTMDP-3S Multi-Range Torque Tester with any 3 Transducers up to 1000 lbf-in
3,495.00
AWS MTMDP-4L Multi-Range Torque Tester with any 4 Transducers up to 750ft-lbs
4,195.00
AWS MTMDP-4S Multi-Range Torque Tester with any 4 Transducers up to 1000 lbf-in
3,695.00

AWS RDF Standard Rundown Fixture - Joint Simulators for Torque Testers
AWS RDF Standard Rundown Fixture - Joint Simulators for Torque Testers

AWS RDF Run Down Fixture - Joint Simulators for Torque Testers
Required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic)
Manufacturer: AWS
Warranty: One Year
The AWS RDF Standard Rundown Fixture - Joint Simulators for Torque Testers is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The AWS RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS RDFA-100 Standard Rundown Fixture, 100 Lb-ft, 1/2" Sq. Dr.
275.00
AWS RDFA-1000 Standard Rundown Fixture, 1000 Lb-ft, 1" Sq. Dr.
650.00
AWS RDFA-150 Standard Rundown Fixture, 150 Lb-ft, 1/2" Sq. Dr.
275.00
AWS RDFA-2000 Standard Rundown Fixture, 2000 Lb-ft, 1.5" Male to 1" Female
1,295.00
AWS RDFA-250 Standard Rundown Fixture, 250 Lb-ft, 1/2" Sq. Dr.
275.00
AWS RDFA-2500 Standard Rundown Fixture, 2500 Lb-ft, 1.5" Male to 1.5" Female
1,295.00
AWS RDFA-3000 Standard Rundown Fixture, 3000 Lb-ft, 1.5" Male to 1.5" Female
1,495.00
AWS RDFA-50 Standard Rundown Fixture, 50 Lb-ft, 1/2" Sq. Dr.
275.00
AWS RDFA-500 Standard Rundown Fixture, 500 Lb-ft, 3/4" Sq. Dr.
550.00
AWS RDFA-5000 5000 Lb-ft Standard Rundown Fixture, 1.5" Male to 1.5" Female
1,695.00
AWS RDFA-600 Standard Rundown Fixture, 600 Lb-ft, 3/4" Sq. Dr.
550.00
AWS RDFA-750 Standard Rundown Fixture, 750 Lb-ft, 3/4" Sq. Dr.
550.00
AWS RDFA-7500 Standard Rundown Fixture, 7500 Lb-ft, 1.5" Male Sq. Dr., Specify Female Sq., 3/4", 1" or 1.5"
1,695.00
AWS RDIA-10 Standard Rundown Fixture, 10 Lb-in, 1/4" Sq. Dr.
150.00
AWS RDIA-100 Standard Rundown Fixture, 100 Lb-in, 1/4" Sq. Dr.
150.00
AWS RDIA-1000 Standard Rundown Fixture, 1000 Lb-in, 3/8" Sq. Dr.
150.00
AWS RDIA-150 Standard Rundown Fixture, 150 Lb-in, 1/4" Sq. Dr.
150.00
AWS RDIA-25 Standard Rundown Fixture, 25 Lb-in, 1/4" Sq. Dr.
150.00
AWS RDIA-250 Standard Rundown Fixture, 250 Lb-in, 3/8" Sq. Dr.
150.00
AWS RDIA-50 Standard Rundown Fixture, 50 Lb-in, 1/4" Sq. Dr.
150.00
AWS RDIA-500 Standard Rundown Fixture, 500 Lb-in, 3/8" Sq. Dr.
150.00
AWS RDIA-750 Standard Rundown Fixture, 750 Lb-in, 3/8" Sq. Dr.
150.00
AWS RDIOA-100 Standard Rundown Fixture, 100 Oz-in, 1/4" Sq. Dr.
150.00
AWS RDIOA-200 Standard Rundown Fixture, 200 Oz-in, 1/4" Sq. Dr.
150.00
AWS RDIOA-50 Standard Rundown Fixture, 50 Oz-in, 1/4" Sq. Dr.
150.00

AWS TT-3000 / AWS-3000 Desktop Torque Tester
AWS TT-3000 / AWS-3000 Desktop Torque Tester

AWS TT-3000 / AWS-3000 Desktop Torque Tester
Digital Torque Tester for For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric
16 Ranges up to 1000 Lb-ft.
Eight selectable engineering units: Oz-in, Lb-in, Lb-ft, N-m, N-cm, Kgf-m, gf-cm, Kgf-m
RS-232 output
The AWS TT-3000 / AWS-3000 Desktop Torque Tester is designed specifically for the needs of today production facilities. The AWS-3000 powerful and versatile systems accommodate most testing requirements at an outstanding cost benefit. perfect for testing click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic. Storage memory allows 999 data points to be saved to the unit for review, or transmitted to a local printer or PC via the standard RS232 interface. The unique keylock feature enables tamper-proof operation. High and low limits are easily set, and a panel mounted LED provides visual notification to the user when torque reaches these limits. Systems include dedicated internal transducers in vertical or horizontal configurations, and rundown fixtures for power/pulse tool testing.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS TT-3001 / AWS-3001 Desktop Torque Tester, 10 - 100 Oz-in, 1/4" Sq. Dr.
1,495.00
AWS TT-3002 / AWS-3002 Desktop Torque Tester, 20 - 200 Oz-in, 1/4" Sq. Dr.
1,495.00
AWS TT-3005 / AWS-3005 Desktop Torque Tester, 5 - 50 Lb-in, 1/4" Sq. Dr.
1,495.00
AWS TT-30050 / AWS-30050 Desktop Torque Tester, 5 - 50 Ozf-in, 1/4" Sq. Dr.
1,495.00
AWS TT-3010 / AWS-3010 Desktop Torque Tester, 10 - 100 Lb-in, 1/4" Sq. Dr.
1,495.00
AWS TT-30100 / AWS-30100 Desktop Torque Tester, 100 - 1000 Lb-in, 3/8" Sq. Dr.
1,595.00
AWS TT-3011 / AWS-3011 Desktop Torque Tester, 1 - 10 Lb-in, 1/4" Sq. Dr.
1,495.00
AWS TT-3012 / AWS-3012 Desktop Torque Tester, 2.5 - 25 Lb-in, 1/4" Sq. Dr.
1,495.00
AWS TT-3015 / AWS-3015 Desktop Torque Tester, 15 - 150 Lb-in, 1/4" Sq. Dr.
1,495.00
AWS TT-3025 / AWS-3025 Desktop Torque Tester, 25 - 250 Lb-in, 3/8" Sq. Dr.
1,495.00
AWS TT-3050 / AWS-3050 Desktop Torque Tester, 50 - 500 Lb-in, 3/8" Sq. Dr.
1,495.00
AWS TT-3075 / AWS-3075 Desktop Torque Tester, 75 - 750 Lb-in, 3/8" Sq. Dr.
1,495.00
AWS TT-3100 / AWS-3100 Desktop Torque Tester, 10 - 100 Lb-ft, 1/2" Sq. Dr.
1,895.00
AWS TT-3150 / AWS-3150 Desktop Torque Tester, 15 - 150 Lb-ft, 1/2" Sq. Dr.
1,895.00
AWS TT-3250 / AWS-3250 Desktop Torque Tester, 25 - 250 Lb-ft, 1/2" Sq. Dr.
1,895.00
AWS TT-3750 / AWS-3750 Desktop Torque Tester, 75 - 750 Lb-ft, 3/4" Sq. Dr.
1,895.00

AWS TT-HY Hydraulic Wrench Torque Tester
AWS TT-HY Hydraulic Wrench Torque Tester

AWS TT-HY Hydraulic Wrench Torque Tester

Capacities up to 25,000 lb-ft
Manufacturer: Checkline
Warranty: One Year
The AWS TT-HY Hydraulic Wrench Torque Tester is designed for precision testing of high capacity hydraulic wrenches. Available with built-in or remote display. Commonly used for testing Rad, Hytorc, Cleco, TorcUP and many other hydraulic wrenches.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS 41011 1,000 Lb-Ft / 1,355 Nm Torque Test Stand, 1.5" F Dr, with AWS-4050 Display
4,795.00
AWS 41011-HY 1000 Lb-Ft Torque Test Stand, 1" F Dr, without Display
2,795.00
AWS 41011-HYDP 1000 Lb-Ft Torque Test Stand, 1" F Dr, with Display
4,295.00
AWS 41012 2,500 Lb-Ft / 3,390 Nm Torque Test Stand, 1.5" F Dr, with AWS-4050 Display
4,995.00
AWS 41012-HY 2500 Lb-Ft Torque Test Stand, 1.5" F Dr, without Display
2,995.00
AWS 41012-HYDP 2500 Lb-Ft Torque Test Stand, 1.5" F Dr, with Display
4,495.00
AWS 41013 5,000 Lb-Ft / 6,780 Nm Torque Test Stand, 1.5" F Dr, with AWS-4050 Display
5,295.00
AWS 41013-HY 5000 Lb-Ft Torque Test Stand, 1.5" F Dr, without Display
2,995.00
AWS 41013-HYDP 5000 Lb-Ft Torque Test Stand, 1.5" F Dr, with Display
4,495.00
AWS 41014 7,500 Lb-Ft / 10,169 Nm Torque Test Stand, 1.5" F Dr, with AWS-4050 Display
5,495.00
AWS 41014-HY 7500 Lb-Ft Torque Test Stand, 1.5" F Dr, without Display
3,295.00
AWS 41014-HYDP 7500 Lb-Ft Torque Test Stand, 1.5" F Dr, with Display
4,995.00
AWS 41015 10,000 Lb-Ft / 13,558 Nm Torque Test Stand, 1.5" F Dr, with AWS-4050 Display
5,795.00
AWS 41015-HY 10,000 Lb-Ft Torque Test Stand, 1.5" F Dr, without Display
4,095.00
AWS 41015-HYDP 10,000 Lb-Ft Torque Test Stand, 1.5" F Dr, with Display
5,795.00
AWS 41016 50,000 Lb-Ft / 67,800 Nm Torque Test Stand, 3.5" F Dr, with AWS-4050 Display
8,995.00
AWS 41025 25,000 Lb-Ft / 33,900 Nm Torque Test Stand, 2.5" F Dr, with AWS-4050 Display
7,995.00

AWS TT-HYRD Torque Tester for Multipliers, Rotating and Geared Torque Wrenches
AWS TT-HYRD Torque Tester for Multipliers, Rotating and Geared Torque Wrenches

AWS TT-HYRD Torque Tester for Multipliers, Rotating and Geared Torque Wrenches
Torque Tester for high range rotating torque wrench and torque multipliers

Capacities up to 25,000 lb-ft
TheAWS TT-HYRD Torque Tester for Multipliers, Rotating and Geared Torque Wrenchesis designed for precision testing of pneumatic impact tools and geared wrenches. Commonly used for testing Ingersoll Rand, DeWalt, Milwaukee, Westward and many others makes.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS 41011-HYRD Test Stand, 1000 Lb-Ft, 1" F Dr, without Display
4,095.00
AWS 41011-HYRD-DP Test Stand, 1000 Lb-Ft / 1355Nm, 1" F Dr, with Run-Down-Fixture and Display
5,495.00
AWS 41012-HYRD Test Stand, 2500 Lb-Ft, 1.5" F Dr, without Display
4,295.00
AWS 41012-HYRD-DP Test Stand, 2500 Lb-Ft / 3400 Nm, 1" F Dr, with Run-Down-Fixture and Display
5,695.00
AWS 41013-HYRD Test Stand, 5000 Lb-Ft, 1.5" F Dr, without Display
2,856.75
AWS 41013-HYRD-DP Test Stand, 5000 Lb-Ft / 6800 Nm, 1" F Dr, with Run-Down-Fixture and Display
5,695.00
AWS 41014-HYRD Test Stand, 7500 Lb-Ft, 1.5" F Dr, without Display
4,795.00
AWS 41014-HYRD-DP Test Stand, 7500 Lb-Ft / 10100 Nm, 1.5" F Dr, with Run-Down-Fixture and Display
6,195.00

AWS TT-IMP Impact Wrench Torque Tester
AWS TT-IMP Impact Wrench Torque Tester

AWS TT-IMP Impact Wrench Torque Tester
Capacities up to 5000 lb-ft / 6800 Nm
Made in the USA
The AWS TT-IMP Impact Wrench Torque Tester is specially designed with extra-rugged construction for the demanding job of testing impact tools. The flange-mounted transducer is fixed in a heavy-duty frame designed for secure bench top mounting. A digital display is connected remotely to isolate the electronics from the damaging vibrations caused by impact tools. A specially designed spline drive run-down-fixture simulates real-world application conditions, allowing the impact tool motor to ramp-up to freely rotate several times before building resistance to rotation.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS TT-4101000F-IMP Impact Torque Test System, 100-1000 lb-ft, Includes Display and Run-down-fixture
4,595.00
AWS TT-4102000F-IMP Impact Torque Test System, 200-2000 lb-ft, Includes Display and Run-down-fixture
4,795.00
AWS TT-4102500F-IMP Impact Torque Test System, 250-2500 lb-ft, Includes Display and Run-down-fixture
6,350.00
AWS TT-410250F-IMP Impact Torque Test System, 25-250 lb-ft, Includes Display and Run-down-fixture
3,995.00
AWS TT-4105000F-IMP Impact Torque Test System, 500-5000 lb-ft, Includes Display and Run-down-fixture
6,350.00
AWS TT-410500F-IMP Impact Torque Test System, 50-500 lb-ft, Includes Display and Run-down-fixture
4,295.00
AWS TT-41050F-IMP Impact Torque Test System, 5-50 lb-ft, Includes Display and Run-down-fixture
3,995.00
AWS TT-4107500F-IMP Impact Torque Test System, 750-7500 lb-ft, Includes Display and Run-down-fixture
9,895.00

AWS TT-QC / AWS-QC Digital Torque Tester
AWS TT-QC / AWS-QC Digital Torque Tester

AWS TT-QC / AWS-QC Digital Torque Tester -Bench Mount Digital Torque Tester for manual and power torque screwdrivers and wrenches
Ideal for in-house testing and calibration of torque tools
Available in 15 different measuring ranges
Eight selectable engineering units: oz-in, lb-in, lb-ft, N-m, cN-m, Kgf-cm, gf-cm, Kgf-m
The AWS TT-QC / AWS-QC Digital Torque Tester is a simple bench mount digital torque tester for quick tool verification. Our smallest and lowest cost bench mount torque tester to date, the AWS TT-QC / AWS-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metro logy grade tester. A unique rotating display (optional) and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations, and make switching between the two modes almost effortless. It is ideal for switching between pistol grip and inline tool checking. The AWS TT-QC / AWS-QC Digital Torque Tester takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS TT-QC-1000i-3/8 Digital Torque Tester AWS-QC QCI-1000, Range 100 - 1000 lb-in, 3/8" Drive
1,095.00
AWS TT-QC-100f-1/2 Digital Torque Tester AWS-QC QCF-100, Range 10 - 100 lb-ft, 1/2" Drive
1,195.00
AWS TT-QC-100i-1/4 Digital Torque Tester AWS-QC QCI-100, Range 10 - 100 lb-in, 1/4" Drive
995.00
AWS TT-QC-100z-1/4 Digital Torque Tester AWS-QC QCIO-100, Range 10 - 100 oz-in, 1/4" Drive
1,095.00
AWS TT-QC-10i-1/4 Digital Torque Tester AWS-QC QCI-10, Range 1 - 10 in-lbs, 1/4" Drive
995.00
AWS TT-QC-150f-1/2 Digital Torque Tester AWS-QC QCF-150, Range 15 - 150 lb-ft, 1/2" Drive
1,195.00
AWS TT-QC-150i-1/4 Digital Torque Tester AWS-QC QCI-150, Range 15 - 150 lb-in, 1/4" Drive
995.00
AWS TT-QC-200z-1/4 Digital Torque Tester AWS-QC QCIO-200, Range 20 - 200 oz-in, 1/4" Drive
995.00
AWS TT-QC-250f-1/2 Digital Torque Tester AWS-QC QCF-250, Range 25 - 250 lb-ft, 1/2" Drive
1,195.00
AWS TT-QC-250i-3/8 Digital Torque Tester AWS-QC QCI-250, Range 25 - 250 in-lbs, 3/8" Drive
995.00
AWS TT-QC-25i-1/4 Digital Torque Tester AWS-QC QCI-25, Range 2.5 - 25 in-lbs, 1/4" Drive
995.00
AWS TT-QC-500f-3/4 Digital Torque Tester AWS-QC QCF-500, Range 50 - 500 lb-ft, 3/4" Drive
1,195.00
AWS TT-QC-500i-3/8 Digital Torque Tester AWS-QC QCI-500, Range 50 - 500 lb-in, 3/8" Drive
995.00
AWS TT-QC-50i-1/4 Digital Torque Tester AWS-QC QCI-50, Range 5 - 50 lb-in, 1/4" Drive
995.00
AWS TT-QC-50z-1/4 Digital Torque Tester AWS-QC QCIO-50, Range 5 - 50 oz-in, 1/4" Drive
1,095.00
AWS TT-QC-600F-3/4 Digital Torque Tester AWS-QC QCF-600, Range 60 - 600 lb-ft, 3/4" Drive
1,795.00
AWS TT-QC-750f-3/4 Digital Torque Tester AWS-QC QCF-750, Range 75 - 750 lb-ft, 3/4" Drive
1,495.00
AWS TT-QC-750i-3/8 Digital Torque Tester AWS-QC QCI-750, Range 75 - 750 lb-in, 3/8" Drive
1,095.00

AWS TT-QC-CC Waterproof Carrying Case for AWS-QC
AWS TT-QC-CC Waterproof Carrying Case for AWS-QC

AWS TT-QC-CC Waterproof Carrying Case for AWS-QC
Manufacturer: Checkline
Warranty: One Year
The AWSV TT-QC-CC is the protection to send your AWS TT-QC into even the most severe conditions.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS TT-QC-CC Waterproof Carrying Case for AWS TT-QC
125.00

AWS TT-QCM / AWS-QCM / Aimco Auditor Torque Wrench Tester
AWS TT-QCM / AWS-QCM / Aimco Auditor Torque Wrench Tester

High Precision Torque Tester for tool verification and calibration

AWS TT-QCM / AWS-QCM or Aimco Auditor Torque Wrench Tester

Accuracy: 0.5% of reading (optional 0.25% available)

Capacities from 10 in-oz to 2000 lb-ft

Displays torque in 8 measuring units: oz-in, lb-in, lb-ft, N-m, cN-m, kgf-cm, gf-cm, kgf-m
The AWS TT-QCM / AWS-QCM / Aimco Auditor Torque Tester is designed for verification and calibration of a wide range of torque wrenches and torque tools. It's bench top design is perfect for testing click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic.Flexible design for various torque wrench lengths and brand. A large LCD display with easy to navigate menu allows for quick setup. Storage memory allows 999 data points to be saved to the unit for review, or transmitted to a local printer or PC via the standard RS232 interface. High and low limits are easily set, and a panel mounted LED provides visual notification to the user when torque reaches these limits. Systems include dedicated internal transducers in vertical or horizontal configurations, it can be switched by the operator after purchase.

Please click on the links below for additional information on the models available for this product:
Models Available Price
AWS TT-QCMF-100 Torque Wrench Tester, 10 - 100 Lb. Ft., 1/2" Sq. Drive
2,195.00
AWS TT-QCMF-1000 Torque Wrench Tester, 100-1000 Lb. Ft., 1" Sq. Drive
2,195.00
AWS TT-QCMF-150 Torque Wrench Tester, 15 - 150 Lb. Ft., 1/2" Sq. Drive
2,195.00
AWS TT-QCMF-2000 Torque Wrench Tester, 200-2000 Lb. Ft., 1" Sq. Drive
2,195.00
AWS TT-QCMF-250 Torque Wrench Tester, 25 - 250 Lb. Ft., 1/2" Sq. Drive
2,195.00
AWS TT-QCMF-500 Torque Wrench Tester, 50 - 500 Lb. Ft., 3/4" Sq. Drive
2,195.00
AWS TT-QCMF-600 Torque Wrench Tester, 60 - 600 Lb. Ft., 3/4" Sq. Drive
2,195.00
AWS TT-QCMF-750 Torque Wrench Tester, 75 - 750 Lb. Ft., 3/4" Sq. Drive
2,195.00
AWS TT-QCMI-10 Torque Wrench Tester, 1 - 10 Lb. In., 1/4" Sq. Drive
1,995.00
AWS TT-QCMI-100 Torque Wrench Tester, 10 - 100 Lb. In., 1/4" Sq. Drive
1,995.00
AWS TT-QCMI-1000 Torque Wrench Tester, 100 - 1000 Lb. In., 3/8" Sq. Drive
1,995.00
AWS TT-QCMI-150 Torque Wrench Tester, 15 - 150 Lb. In., 1/4" Sq. Drive
1,995.00
AWS TT-QCMI-25 Torque Wrench Tester, 2.5 - 25 Lb. In., 1/4" Sq. Drive
1,995.00
AWS TT-QCMI-250 Torque Wrench Tester, 25 - 250 Lb. In., 3/8" Sq. Drive
1,995.00
AWS TT-QCMI-50 Torque Wrench Tester, 5 - 50 Lb. In, 1/4" Sq. Drive
1,995.00
AWS TT-QCMI-500 Torque Wrench Tester, 50 - 500 Lb. In., 3/8" Sq. Drive
1,995.00
AWS TT-QCMI-750 Torque Wrench Tester, 75 - 750 Lb. In., 3/8" Sq. Drive
1,995.00
AWS TT-QCMIO-10 Torque Wrench Tester, 10 Oz-in / 7 N-cm, 1/4" Sq. Drive
2,195.00
AWS TT-QCMIO-100 Torque Wrench Tester, 10 - 100 Oz In, 1/4" Sq. Drive
1,995.00
AWS TT-QCMIO-200 Torque Wrench Tester, 20 - 200 Oz In, 1/4" Sq. Drive
1,995.00
AWS TT-QCMIO-50 Torque Wrench Tester, 5 - 50 Oz In, 1/4" Sq. Drive
2,195.00

Cedar DWT-200 Digital Torque Tester for Manual Wrenches
Cedar DWT-200 Digital Torque Tester for Manual Wrenches

Digital Torque Tester for Manual Torque Wrenches
Capacity 200 Nm
The Cedar DWT-200 Digital Torque Tester for Manual Wrenches is ideal for checking torque on manual torque wrenches up to 200 Nm / 1,500 lbf-in with an accuracy of .5% F.S., 1 LSD. The tester features 3 measurement modes: Peak Down, Peak, or Real Time measurement modes and selectable units lbf-in, kgf-cm, N-m

Please click on the links below for additional information on the models available for this product:
Models Available Price
Cedar DWT-200 Digital Torque Tester for Manual Wrenches
2,028.00

Imada Cedar DI-12-SL Automatic Breakaway Torque Tester
Imada Cedar DI-12-SL Automatic Breakaway Torque Tester

Imada Cedar DI-12-SL Automatic Breakaway Torque Tester
Selectable units: lbf-in, kgf-cm, N-m. ozf-in units avaiable
Peak, Real Time and Breakaway/Yield measuring modes (selectable)

The Imada Cedar DI-12-SL Automatic Breakaway Torque Tester is designed to find the actual yield tightening torque value for specific thread joints which consist of a variety of thread types, multi-layered material, hole sizes, etc.Torque controlled power tools are set to apply consistent torque, but fasteners are not necessarily tightened to that value if the tools are not calibrated. A breakaway test is used to verify the actual tightened torque of a bolt. Breakaway torque tests require a skilled, experienced operator to sense when the bolt begins to breakaway. DI-12 automates this complex operation. Once breakaway torque is measured, power drivers can be reset to the proper tightening torque.DI-12 Automatic Breakaway Torque Tester drives the test piece at consistent speed and detects breakaway torque without overtorquing pretightened fasteners

Please click on the links below for additional information on the models available for this product:
Models Available Price

Imada Cedar DI-1M Digital Torque Tester
Imada Cedar DI-1M Digital Torque Tester

Imada Cedar DI-1M Digital Torque Tester
Air Tool & Impact Wrench Digital Torque Tester
4 Ranges up to 362.0 lb-ft / 50.00 kg-m / 500.0 N-m.
For calibrating hand screwdrivers, wrenches, and power tools.
Selectable Units: lb-ft, kg-m and N-m
The Imada Cedar DI-1M Digital Torque Tester is perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power driver. These fast response Imada Cedar DI-1M give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of 0.5%, 1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable. RS-232 output, auto zero reset, auto shutoff and low battery indicator complete the set of features. It is powered by an internal NiCad battery or the included AC adapter. Peak, Real Time and Peak Down modes are selectable. Peak mode captures the peak torque achieved during a test. PEAK reading will not change until a higher value is measured. Real Time mode displays the real time transient torque value. Peak down captures the critical first peak value and will not change even if a higher value is subsequently measured. The Imada Cedar DI-1M also provides peak data for SPC (statistical process control) via the RS232 port.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Imada Cedar DI-1M-200 Impact Torque Tester, 145 lbf-ft/ 200 N-m Capacity
2,990.00
Imada Cedar DI-1M-200A Impact Torque Tester, 1800 lbf-in/ 200 N-m Capacity
2,990.00
Imada Cedar DI-1M-50 Impact Torque Tester, 440 lbf-in/ 5000 N-cm Capacity
2,990.00
Imada Cedar DI-1M-500 Impact Torque Tester, 362 lbf-ft/ 500 N-m Capacity
2,990.00

Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches
Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches

Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches
Capacity:
0.1 - 220.0 lbf-in
0.1 - 250.0 kgf-cm
0.01 - 25.00 N-m

Selectable Units: lb-ft, kg-m and N-m
The Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches is a fast response torque tester that is perfectly suited for on-the-spot calibration of air tools and impact drivers, but will calibrate any type of manual wrenches as well. This torque tester gives a digital readout of peak value in either direction and also indicate the number of blows for a selected time period. The Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches has an accuracy of 0.5%, 1 LSD, Peak, Real Time and Peak Down modes, and provides peak data for SPC (statistical process control) via the RS232 port

Please click on the links below for additional information on the models available for this product:
Models Available Price
Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches, 220 lbf-in/ 250 Kgf-cm
2,535.00

Imada Cedar DIS-IP Digital Torque Tester with Remote Sensor
Imada Cedar DIS-IP Digital Torque Tester with Remote Sensor

Imada Cedar DIS-IP Digital Torque Tester with Remote Sensor

4 Ranges up to 2.0~362.0 lbf-ft / 0.20~50.00 kgf-m / 2.0~500.0 N-m
800 data memory for recall or for SPC download
The Imada Cedar DIS-IP Digital Torque Tester with Remote Sensor is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB download for analysis by Imada data acquisition software SW-1SV-USB. Calibrate your own torque wrenches and electric drivers and and save down time.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Imada Cedar DIS-IP200 Digital Torque Tester with Remote Sensor, 1740 lbf-in/ 145 lbf-ft/ 20 kgf-cm
1,567.00
Imada Cedar DIS-IP5 Digital Torque Tester with Remote Sensor, 44 lbf-in/ 50 kgf-cm
2,119.00
Imada Cedar DIS-IP50 Digital Torque Tester with Remote Sensor, 440 lbf-in/ 500 kgf-cm
1,567.00
Imada Cedar DIS-IP500 Digital Torque Tester with Remote Sensor, 4400 lbf-in/ 362 lbf-ft/ 50 kgf-cm
1,833.00

Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester
Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester

Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester
9 Ranges up to 45.00 lb-in
The Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester is a motorized rotating torque tester that measures rotating dynamic torque while turning the sample. Check the rotating torque, smoothness of rotation and components of small precision motors, such as, gearbox, bearings, oil seals, etc. Torque data can be continuously output via RS-232 enabling you to display a torque profile using data acquisition software.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Imada Cedar NTS-6-S1 Motorized Rotating Torque Tester, 0.030 - 0.900 lb-in
4,934.00
Imada Cedar NTS-6-S10 Motorized Rotating Torque Tester, 0.30 - 9.00 lb-in
5,935.00
Imada Cedar NTS-6-S1oz Motorized Rotating Torque Tester, 0.30 - 14.00 oz-in
4,934.00
Imada Cedar NTS-6-S2 Motorized Rotating Torque Tester, 0.030 - 1.740 lb-in
4,934.00
Imada Cedar NTS-6-S20 Motorized Rotating Torque Tester, 0.30 - 17.40 lb-in
6,221.00
Imada Cedar NTS-6-S2oz Motorized Rotating Torque Tester, 0.30 - 28.00 oz-in
4,934.00
Imada Cedar NTS-6-S5 Motorized Rotating Torque Tester, 0.30 - 4.50 lb-in
5,434.00
Imada Cedar NTS-6-S50 Motorized Rotating Torque Tester, 0.30 - 45.00 lb-in
7,079.00
Imada Cedar NTS-6-S5oz Motorized Rotating Torque Tester, 3.0 - 70.0 oz-in
5,434.00

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches
Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches
3 ranges up to 130 lb-in
Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m (selectable)
USB Data Output
The Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches is ideal for calibrating electric screwdrivers with torque control. It features peak mode to capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical first peak value. Standard 3/8" drive is good for checking torque wrenches but not impact wrenches. All digital torque testers are sold in kit form complete with tester, hard carrying case, 2 smart driver adapters and AC charger/adapter. Smart driver adapters simulate screw tightening, eliminating the need for reversing the power driver which is required for conventional driver adapters.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Imada Cedar CD-150M Digital Torque Tester, 130 lb-in / 15 Nm Capacity
2,460.00
Imada Cedar DI-11 Digital Torque Tester, 174 lb-in / 20 Nm Capacity
3,198.00
Imada Cedar I-8 Electric Screwdriver Torque Tester, 7 lb-in / 78 Ncm Capacity
2,148.00
Imada Cedar I-80 Electric Screwdriver Torque Tester, 70 lb-in / 7.8 Nm Capacity
2,148.00

Imada HTGS Digital Torque Gauge
Imada HTGS Digital Torque Gauge

Imada HTGS Digital Torque Gauge
4 Ranges up to 85.00 lbf-in
1,000 data memory for recall or download
The Imada HTGS Digital Torque Gauge is a precision instrument that features a remote torque sensor with a Jacobs chuck. The chuck is designed to grip a test sample, a screwdriver bit or a wide range of other fixtures. The Imada HTGS measures torque in both clockwise and counter-clockwise directions. The display shows measurements in lbf-in, ozf-in, kgf-cm, or N-cm. The Imada HTGS torque tester features easy to use menus to make programming simple. Select units, reverse the display, set high/low setpoints, and set all other functions using plain language menus.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Imada HTGS-15 Digital Torque Gauge, 15.00 lb-in
1,918.00
Imada HTGS-15L Digital Torque Gauge, 15.00 lb-in
2,113.00
Imada HTGS-4 Digital Torque Gauge, 70.00 ozf-in
2,191.00
Imada HTGS-40 Digital Torque Gauge, 40.00 lb-in
1,918.00
Imada HTGS-40L Digital Torque Gauge, 40.00 lb-in
2,113.00
Imada HTGS-85 Digital Torque Gauge, 85.00 lb-in
2,048.00
Imada HTGS-85L Digital Torque Gauge, 85.00 lb-in
2,243.00

Mark-10 CAP-TSTM-DC Motorized Cap Torque Test System
Mark-10 CAP-TSTM-DC Motorized Cap Torque Test System

Mark-10 CAP-TSTM-DC Motorized Cap Torque Test System
Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests
Optional Digital Angle Indicator
The Mark-10 CAP-TSTM-DC Motorized Cap Torque Test System is designed to measure open and closure torque measurements on caps, lids, valves and more. Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests. Versatile modular design allows the stand to be configured with a variety of gripping fixtures while a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. The Mark-10 TSTM-DC offers expanded capabilities, including full PC control, programmable angle limits, programmable cycling, auto return, password protection, and other features.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mark-10 CAP-TSTM-DC-100i Motorized Cap Torque Testing System, 100lb-in Capacity
11,120.00
Mark-10 CAP-TSTM-DC-12i Motorized Cap Torque Testing System, 12lb-in Capacity
11,120.00
Mark-10 CAP-TSTM-DC-50i Motorized Cap Torque Testing System, 50lb-in Capacity
11,120.00
Mark-10 CAP-TSTM-DC-50z Motorized Cap Torque Testing System, 50oz-in Capacity
11,175.00

Mark-10 Digital Torque Gauges Series TT03
Mark-10 Digital Torque Gauges Series TT03

Mark-10 Digital Torque Gauges Series TT03

6 Ranges up to 100lb-in

Programmable set points with pass/fail indicators

USB Data Output
The Mark-10 Digital Torque Gauges Series TT03 is designed for clockwise and counter-clockwise torque testing applications in virtually every industry, with capacities from 10 ozFin to 100 lbFin (7 to 1,150 Ncm). A dedicated remote torque sensor with Jacobs chuck can be used to grip a sample, bit, or fixture. The gauges rugged aluminum housing allows for hand-held use or test stand mounting for more sophisticated testing requirements. Mark-10 Series TT03 Digital Torque Gauge features a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The gauges include MESURTM Lite data acquisition software. MESURTM Lite tabulates single point data. One-click export to Excel allows for further data manipulation.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mark-10 MTT03-100 Digital Torque Gauge Series TT03, Capacity 100 lb-in
1,400.00
Mark-10 MTT03-10Z Digital Torque Gauge Series TT03, Capacity 10 oz-in
1,595.00
Mark-10 MTT03-12 Digital Torque Gauge Series TT03, Capacity 12 lb-in
1,400.00
Mark-10 MTT03-20Z Digital Torque Gauge Series TT03, Capacity 20 oz-in
1,595.00
Mark-10 MTT03-50 Digital Torque Gauge Series TT03, Capacity 50 lb-in
1,400.00
Mark-10 MTT03-50Z Digital Torque Gauge Series TT03, Capacity 50 oz-in
1,595.00

Mark-10 Manual Torque Test Stands TST & TSTH
Mark-10 Manual Torque Test Stands TST & TSTH

Mark-10 Manual Torque Test Stands TST & TSTH

Convenient side-mounted hand wheel

Modular Design
The Mark-10 Manual Torque Test Stands TST & TSTH is ideal for a wide variety of torque testing applications up to 100 lbin, including closure torque testing, fastener torque testing, and more. Its versatile modular design allows it to be configured for a variety of torque sensors and gripping fixtures. Ultra-smooth hand wheel operation ensures ease of use and a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. The Mark-10 Manual Torque Test Stands TST & TSTH include a torque loading plate with tapped holes for grip and custom fixture mounting and a resetable angle indicator.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mark-10 TST Manual Torque Test Stand, Vertical
3,250.00
Mark-10 TSTH Manual Torque Test Stand, Horizontal
3,250.00

Mark-10 Square Drive Torque Sensors Series R55
Mark-10 Square Drive Torque Sensors Series R55

Mark-10 Square Drive Torque Sensors Series R55
Capacities from 20 lbin to 5,000 lbin (220 Ncm to 550 Nm)
The Mark-10 Square Drive Torque Sensor Series R55 is ideal for a wide range of torque testing applications in numerous industries. Square drives on both ends permit inline use with a torque wrench, or for use in OEM and other applications. Ranges available up to 5,000 lbFin (550 Nm).

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mark-10 MR55-100 Square Drive Torque Sensor Series R55, 100 lbFin
1,375.00
Mark-10 MR55-1000 Square Drive Torque Sensor Series R55, 1000 lbFin
1,375.00
Mark-10 MR55-20 Square Drive Torque Sensor Series R55, 20 lbFin
1,375.00
Mark-10 MR55-200 Square Drive Torque Sensor Series R55, 200 lbFin
1,375.00
Mark-10 MR55-400 Square Drive Torque Sensor Series R55, 400 lbFin
1,375.00
Mark-10 MR55-50 Square Drive Torque Sensor Series R55, 50 lbFin
1,375.00
Mark-10 MR55-5000 Square Drive Torque Sensor Series R55, 5000 lbFin
1,375.00

Mark-10 Torque Tool Testers Series TT02
Mark-10 Torque Tool Testers Series TT02

Mark-10 Torque Tool Testers Series TT02

4 Ranges up to 100 lb-in

Units of measure: ozf-in, lbf-in, N-m, and N-cm (selectable)

High-speed 7,000 Hz sampling rate accurately captures peak torque values
The Mark-10 Torque Tool Tester Series TT02 is a simple and accurate solution for testing manual and electric torque screwdrivers, wrenches, and other tools. The Mark-10 TT02 are compact and rugged, suitable for production environments. A universal 3/8 square receptacle accepts common bits and attachments. The Mark-10 Torque Tool Tester Series TT02 captures peak torque in both measurement directions, and also calculates 1st and 2nd peaks, useful for click-type tools. A blazingly fast sampling rate of 7,000 Hz and accuracy of +- 0.3% produce reliable and consistent test results. The Mark-10 TT02 includes a range of sophisticated productivity-enhancing features, including USB, RS-232, Mitutoyo, and analog outputs, automatic data output/zeroing/data storage upon tool slip or click, memory storage for 1,000 readings, pass/fail indicators and outputs, and more. Password protection is provided to prevent unauthorized changes to settings and calibration. Series TT02 testers include MESURTMLite data acquisition software. MESURTMLite tabulates continuous or single point data. Data stored in the TT02s memory can also be downloaded in bulk. One-click export to Excel allows for further data manipulation.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mark-10 MTT02-100 Torque Tool Tester Series TT02, 100 lbFin Capacity
1,495.00
Mark-10 MTT02-12 Torque Tool Tester Series TT02, 12 lbFin Capacity
1,495.00
Mark-10 MTT02-25 Torque Tool Tester Series TT02, 25 lbFin Capacity
1,495.00
Mark-10 MTT02-50 Torque Tool Tester Series TT02, 50 lbFin Capacity
1,495.00

Mountz AURA Auto Reversing Run Down
Mountz AURA Auto Reversing Run Down

Ideal for testing and recording the results of power tools with a torque analyzer or sensor
Compact size and lightweight
Includes two springs to cover the torque range 1 - 50 lbf.in
The Mountz AURA Auto Reversing Run Down is adapters are designed to provide consistent and reliable torque readings for use with power driven torque control tools. The AURA reduces the impact and irregular peaks that cause poor repeatability. The run down adapter is mounted in-line between the tool drive and transducer.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mountz 063292 AURA-50i-17mm Auto Reversing Run Down Adapter
963.00
Mountz 063293 AURA-50i Auto Reversing Run Down Adapter
963.00

Mountz EZ-TorQ III Torque Analyzer
Mountz EZ-TorQ III Torque Analyzer

An ISO 17025 certified torque analyzer used for calibrating and testing small hand screwdrivers, most wrenches, and power tools
Quick and easy-to-use torque analyzer to verify a tools performance on the assembly line
Integer a nibh scelerisque, convallis velit non, dignissim felis
The Mountz EZ-TorQ III Torque Analyzer is easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smart phone like touch-screen interface breaks down barriers and ensures quick and easy validation of different ranges as needed.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mountz 070810 EZ-TorQ III Torque Analyzer, 10i1 - 10 lbf.in, 11.3 - 113 cN.m - 1.2 - 111.5 kgf.cm, 17mm F/Hex
3,190.00
Mountz 070811 EZ-TorQ III Torque Analyzer, 50i5 - 50 lbf.in, 56.5 - 565 cN.m - 5.8 - 57.6 kgf.cm, 17mm F/Hex
3,190.00
Mountz 070812 EZ-TorQ III Torque Analyzer, 100i10 - 100 lbf.in, 113 - 1130 cN.m - 11.5 - 115 kgf.cm, 17mm F/Hex
3,190.00
Mountz 070813 EZ-TorQ III Torque Analyzer, 150i15 - 150 lbf.in, 169.5 - 1695 cN.m - 173 - 17.3 kgf.cm, 17mm F/Hex
3,273.00
Mountz 070814 EZ-TorQ III Torque Analyzer, 300i30 - 300 lbf.in, 339 - 3390 cN.m - 34.5 - 345 kgf.cm, 17mm F/Hex
3,328.00

Mountz LTT Torque and Angle Analyzer
Mountz LTT Torque and Angle Analyzer

Mountz LTT Torque and Angle Analyzer with USB Output
Recommended for all hand screwdrivers, wrenches or power tools.
8 Ranges available up to 250 Lb-ft.
The Mountz LTT Torque and Angle Analyzer is the next generation of torque analyzer. It Provides EZ-Plug & Play. Features an instant auto-recognition system of the transducer connected to the LTT. . The Mountz LTT offers tool testing, graphing capabilities and a graphical menu for easy navigation. It includes three PC Windows based software programs: Torque Meter Interface Program - for sensor calibrations, meter calibration and tool tests, Torque Meter Bootloader - for updating the LTT operating systems and Statistics Calculator - for SPC, CP & CPK calculations.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mountz LTT-100F Torque and Angle Analyzer, 10-100 lbf-ft, Drive Size 1/2" F/Sq. Dr., # 068406
4,345.00
Mountz LTT-100i Torque and Angle Analyzer, 10-100 lbf-in, Drive Size 1/4" F/Sq. Dr., # 068403
4,070.00
Mountz LTT-10i Torque and Angle Analyzer, 1-10 lbf-in, Drive Size 1/4" F/Sq. Dr., # 068400
4,070.00
Mountz LTT-250F Torque and Angle Analyzer, 25-250 lbf-ft, Drive Size 1/2" F/Sq. Dr., # 068407
4,345.00
Mountz LTT-250i Torque and Angle Analyzer, 25-250 lbf-in, Drive Size 1/4" F/Sq. Dr., # 068404
4,070.00
Mountz LTT-25i Torque and Angle Analyzer, 2.5-25 lbf-in, Drive Size 1/4" F/Sq. Dr., # 068401
4,070.00
Mountz LTT-50F Torque and Angle Analyzer, 5-50 lbf-ft, Dive Size 3/8" F/Sq. Dr., # 068405
4,345.00
Mountz LTT-50i Torque and Angle Analyzer, 5-50 lbf-in, Drive Size 1/4" F/Sq. Dr., # 068402
4,070.00

Mountz Mini-RDA Mini Run Down Adapters
Mountz Mini-RDA Mini Run Down Adapters

Provide consistent and reliable torque readings for power-driven torque control tools
Compact to limit spacing between the power tool and torque measurement equipment for improved accuracy and ease of use
The Mountz Mini-RDA Mini Run Down Adapters is designed to be used with low torque sensors to provide consistent and reliable torque readings for power-driven torque control tools. Run down adapters are used to simulate various joint characteristics to provide a more accurate torque reading during testing and calibration. Mountz Mini-RDA Mini Run Down Adapters allow for an accurate simulation of actual joints. Run-down adapters are mounted in-line between the tool drive and the transducer of a torque analyzer or sensor, reducing the impact and irregular peaks that cause poor testing repeatability.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mountz Mini-RDA10 Mini Run Down Adapters 061229-10
215.00
Mountz Mini-RDA2 Mini Run Down Adapters 061229-2
215.00
Mountz Mini-RDA4 Mini Run Down Adapters 061229-4
215.00
Mountz Mini-RDA6 Mini Run Down Adapters 061229-6
215.00

Mountz PTT-2000 Torque Analyzer
Mountz PTT-2000 Torque Analyzer

Mountz PTT-2000 Torque Analyzer
Operates with Torque & Force sensors.
Real time graph of torque vs. time using associated PC Windows software
The Mountz PTT-2000 Torque Analyzer is the next generation hand-held torque analyzer. It offers EZ-Plug & Play with instant auto recognition with transducers. The Mountz PTT offers tool testing, graphing capabilities and a graphical menu for easy navigation.It is supplied with NIST-Traceable Certification of Calibration.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mountz PTT-2000 Hand-held Torque Analyzer, # 072999
3,135.00

Mountz RDA Run Down Adapters for Torque Testers
Mountz RDA Run Down Adapters for Torque Testers

Mountz RDA Run Down Adapters for Torque Testers
The Mountz run down adapter (RDA) is designed to provide consistent and reliable torque readings for use with power driven torque control tools.
Available in capacities up to 5000 Lb-ft / 6780 Nm

The Mountz RDA Run Down Adapter for Torque Testers is designed to provide consistent and reliable torque readings when testing power driven torque control tools. Mountz RDA Run Down Adapters reduce the impact and irregular peaks that cause poor repeatability. Each Mountz RDA has an effective torque range and will provide repeatable torque data within that range if used correctly. The run down adapter is mounted in-line between the tool drive and transducer.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Mountz RDA-1000F Rundown Fixture, 1000 Lb-ft / 1355 Nm, 1" M/F Sq. Dr., # 063991
4,318.00
Mountz RDA-100F Rundown Fixture, 100 Lb-ft / 135 Nm, 1/2" M/F Sq. Dr., # 063981
787.00
Mountz RDA-100i Rundown Fixture, 100 Lb-in / 11 Nm, 1/4" M/F Sq. Dr., # 063973
396.00
Mountz RDA-10i Rundown Fixture, 10 Lb-in / 113 N-cm, 1/4" M/F Sq. Dr., # 063970
396.00
Mountz RDA-2500F Rundown Fixture, 2500 Lb-ft / 3390 Nm, 1-1/2" M/F Sq. Dr., # 063990
8,250.00
Mountz RDA-250F Rundown Fixture, 250 Lb-ft / 340 Nm, 1/2" M/F Sq. Dr., # 063982
798.00
Mountz RDA-250i Rundown Fixture, 250 Lb-in / 28 Nm, 1/4" M/F Sq. Dr., # 063974
572.00
Mountz RDA-25i Rundown Fixture, 25 Lb-in / 282 N-cm, 1/4" M/F Sq. Dr., # 063971
396.00
Mountz RDA-5000F Rundown Fixture, 5000 Lb-ft / 6780 Nm, 1-1/2" M/F Sq. Dr., # 063992
11,330.00
Mountz RDA-500F Rundown Fixture, 500 Lb-ft / 677 Nm, 3/4" M/F Sq. Dr., # 063983
1,793.00
Mountz RDA-50F Rundown Fixture, 50 Lb-ft / 68 Nm, 3/8" M/F Sq. Dr., # 063978
572.00
Mountz RDA-50i Rundown Fixture, 50 LB-in / 5.6 Nm, 1/4" M/F Sq. Dr., # 063972
396.00
Mountz RDA-750i Rundown Fixture, 750 Lb-in / 85 Nm, 3/8" M/F Sq. Dr., # 063977
572.00

Seekonk TA-Series Torque Analyzer - Dial Torque Tester
Seekonk TA-Series Torque Analyzer - Dial Torque Tester

Seekonk TA-Series Torque Analyzer - Dial Torque Tester
Dial torque analyzer for hand tools
Accuracy: 2.0% of reading
10 Ranges up to 200 ft-lbs
TheSeekonk TA-Series Torque Analyzer is for use with hand operated tools only. Not for use with pneumatic or electric powered tools Torque tools which are in regular use need periodic checks to insure their accuracy. Seekonk features a line of bench mounted torque analyzers for this purpose. These analyzers provide a means of quick and economical standardization. All models are guaranteed accurate to within +/- 2% of indicated reading from 20% to 100% of full range. Available with memory needle or Metric/English dial.

Please click on the links below for additional information on the models available for this product:
Models Available Price
Seekonk TA-100-MD Torque Analyzer, 0 - 100 in-lbs with Memory and 1/4" Female Drive Adapter FFA-10
773.80
Seekonk TA-150-MD Torque Analyzer, 0 - 150 in-lbs with Memory and 3/8" Female Drive Adapter FFA-12
779.85
Seekonk TA-30-MD Torque Analyzer, 0 - 30 in-lbs with Memory and 1/4" Female Drive Adapter FFA-10
773.80
Seekonk TA-300-MD Torque Analyzer, 0 - 300 in-lbs with Memory and 3/8" Female Drive Adapter FFA-12
882.20
Seekonk TA-600-MD Torque Analyzer, 0 - 600 in-lbs with Memory and 3/8" Female Drive Adapter FFA-12
882.20
Seekonk TA-75-MD Torque Analyzer, 0 - 75 in-lbs with Memory and 1/4" Female Drive Adapter FFA-10
773.80
Seekonk TAF-100-MD Torque Analyzer, 0 - 100 ft-lbs with Memory and 1/2" Female Drive Adapter FFA-13
892.15
Seekonk TAF-150-MD Torque Analyzer, 0 - 150 ft-lbs with Memory and 1/2" Female Drive Adapter FFA-13
892.15
Seekonk TAF-200-MD Torque Analyzer, 0 - 200 ft-lbs with Memory and 1/2" Female Drive Adapter FFA-13
892.15
Seekonk TAF-50-MD Torque Analyzer, 0 - 50 ft-lbs with Memory and 1/2" Female Drive Adapter FFA-13
892.25

TWT-410 Torque Wrench Loader
TWT-410 Torque Wrench Loader

Torque Wrench Loader
Calibrates and verifies torque wrenches up 250 lb-ft / 340 Nm
Flexible design for various torque wrench lengths and brands
The TWT-410 Torque Wrench Loader is the ideal tool for calibration and verification of cam-over, click, slip, digital, and dial torque wrenches. The flexible design of the TWT-410 is easy to use and is suitable for various torque wrench lengths and brands.The TWT-410 is designed for use with ourTT-QCorTT-QCMdigital torque testers.Shown with TT-QCM Torque Tester (SOLD SEPARATELY)

Please click on the links below for additional information on the models available for this product:
Models Available Price
TWT-410 Torque Wrench Loader - Does not Include Torque Tester or Mounting Block (REQUIRED)
2,710.00

 

Powered by Marctin Web Architecture