AWS 41012-HYDP 2500 Lb-Ft Test Stand, 1.5 in F Dr, WITH Display
Price: $ 4,495.00
Hydraulic Wrench Torque Tester
Capacities up to 25,000 lb-ft
The TT-HY Series is designed for precision testing of high capacity hydraulic wrenches.
Available with built-in or remote display.
Commonly used for testing Rad, Hytorc, Cleco, TorcUP and many other hydraulic wrenches.
- Heavy Duty Construction
- 4 Digital LCD Display
- Integrated reaction arm posts or slot as required
- RS-232 Data Output
|Accuracy||0.3% of full scale|
|Sampling rate||7,000 Hz|
|Power||AC or rechargeable battery. Multi-step low battery indicator is displayed, tester shuts off automatically when power is too low.|
|Battery Life||Backlight on:up to 7 hours of continuous use|
Backlight off:up to 24 hours of continuous use
|Measurement units||ozFin, lbFin, lbFft, Nm, Ncm|
|Outputs||USB / RS-232:Configurable up to 115,200 baud.|
Mitutoyo:Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog:1 VCD, 0.25% of full scale at capacity.
General purpose:Three open drain outputs, one input.
Set points:Three open drain lines.
|Configurable Settings||1st/2nd peak, digital filters, outputs, automatic shutoff, default settings, key tones, backlight, audio alarms, passwords, calibration|
|Safe overload||150% of full scale (display shows "OVER" at 110% and above)|
|Weight||5.8 lb [2.6 kg]|
|Environmental Requirements||40F - 100F [5C - 45C], <96% humidity (non-condensating)|
Digital Torque Display
- Can be calibrated to virtually any manufacturers strain gauge transducers
- Bidirectional accuracy of 0.5% of indicated reading with AWS transducers, 1% of indicated reading with rotary transducers